Ucm6301

#1

Hello

i am using UCM6301 frimware 1.0.7.12. i have set up Voip trunk which connects and also set up outbound calls which works fine. but the inbound calls is not working i have been through all of it and i cant get calls through to incomming.

#2

In the input rule Try to insert -> _x.

#3

this is set as _+44 following the phone number

#4

this is for inbound route but i also tried tried _x. still not working

#5

You are wrong something, as “_x.” Authorize any incoming figure, check with a phone that does not arrive particular characters