Ucm 6208 static route problem


#1

hello dear community, I would like to know how to get to this destination from the UCM

I HAVE A MIKROTIK ROUTER IN THE MIDDLE OF THE WAN INTERFACE OF THE UCM FOR THE REASON OF TWO SIP TRUNK TYPE PEER AND THE UCM ONLY HAS A WAN PORT, the problem is that I must get to 172.32.21.10 through the ISP 2
and I must also get to 190.10.150.38 through the ISP 1

SINCE ROUTER MIKROTIK ARRIVED PERFECTLY, I added static routes in my mikrotik to those destinations by their respective gateway, the problem is that since 10.0.101.2 that is the wan of my telephone exchange did not reach any of the destinations by their respective gateway.

note:
The addresses that are ETH2, ETH3 are provided by the ISPs can not be changed

I attach the diagram

Thanks in advance.

Diagrama


#2

Static routes ? Just push this IP via WAN.


#3

Thank , Marcin , the problem was mine