Route pattern creation and previleges


#1

Hello
we are Installing a UCM 6510, we used a PRI E1 QSIG TIE to connect with existing Nortel PABX , & that Nortel PABX is connected with external world using PRI trunk and SIP trunk.

Please help us to create privileges levels for the below categories there are 7 categories of extensions to be created
Extensions A-G should dial only the specified numbers . as below ,

1.EXT A – to call only UCM internal numbers- no TIE line calls
2.EXT B –to call above + TIE PABX 5 Digit extension numbers
3. EXT C – to call all above + TIE PABX 8 Digit extension numbers
4.EXT D-to call all above + using TIE PABX external trunk ( access code 9) to local numbers (4,5,6,8)
5.EXT E- to call all above + using TIE PABX external trunk ( access code 9) to all state numbers (04,06,09)
6. EXT F- to call all above + using TIE PABX external trunk ( access code 9) to all mobile numbers (050,056)
7.EXT G- to call all above + using TIE PABX external trunk ( access code 9) to all international numbers (900x.)

Once correct outbound route pattern (7 numbers) created what should be the privilege level for each route and extensions A-G ?