Require Grandstream GXW4104 3CX firmware Fix



We have this unit at a client’s site running 3cx v16. However, the system does not register with 3cx after a reboot of the sip server. Currently, the server was migrated from Windows to Linux since it was able to register using this environment but the unregister after reboot still exists.

We are only able to get it running by rebooting the gateway remotely.

I have seen in previous threads that there is a fix for this, is there a way to obtain this fix?


Switch from register to peer simply :slight_smile:


Thanks for the suggestion, will give it a go and see what happens.


The GXW4104 is a 3CX ‘supported’ gateway so you’re best off contacting 3CX support