Problem with GWN 7000 and DHCP, network group

networking-solutions
#1

Problem working with network group:

Default network group works great with wan membership Multin-WAN and i get IP adress from the DHCP address range (192.168.1.1/24).
When I try to create a new group with WAN 1 and a different address range, i do not get IP address from DHCP (192.168.2.1/24)
192.168.2.2.-254. When I manually set IP address 192.168.2.3 i dont have internet. I setup vlan , client isolation. The problem still exists.
Can I get instructions step by step?
Thanks!

#2

I have similar question. Did you ever get this resolved?

#3

post from 5 years ago, I advise you to open a new post with scenario, products used and relative FW and exact description of the problem