Ht814


#1

I have a issue:
I configured HT814 with PBX (cisco 2911), But, I just used port 1 on HT814 ( call and receive), other ports can only make call, can’t receive calls.
On the PBX, i configured by MAC of WAN port.
I don’t think this is due to the mac address.
Please help me.

Regards,
Gia


#2

Can you confirm the PBX System you say PBX is Cisco 2911.

Be aware that the TCP port for HT814 changes for each of the FXS ports confirm your requirments and firewall setting.

Cheers
Andrew


#3

Thanks for your reply
PABX on Cisco 2911 is CME ver 12.
My system go through a firewall (Fortigate 80C).
Do I need a configuration on this firewall?

Regards,
Gia