Ht 503 outgoing call freepbx with analogic line


#1

hello

going crazy to get working outgoing calls with this setup:

  • asterisk freepbx version 12.0.76.6

  • Grandstream HT 503 version HT-503 V2.0A
    Software HT 503
    Program – 1.0.15.5 Bootloader – 1.0.0.18 Core – 1.0.15.4 Base – 1.0.15.5
    Extra – 1.0.15.3 CPE – 0.0.1.91

i have a working asterisk setup with an existent trunk configured with VoIP provider and multiple VoIP phones all working.

i need to add and use an analogic line for incoming and outgoing calls. incoming and outgoing should use VoIP phones.

analogic line is connected to HT503 line port.

configured HT 503 in this way - PXO:

HT503 IP in our lan is 192.168.2.115
Asterisk FreePbx is 192.168.2.114

using port 5060

Asterisk freepbx trunk for HT503 configuration:

asterisk freepbx inbound route:

asterisk freepbx outbound route:

Incoming calls works are OK.

Freepbx log while incoming call happens:

no errors visible on logs

create an extension too:

here tbh no sure how get it works, so opened all suggestions ofc :slight_smile:

this is extension:

thank you in advance


#2

After changing FXO local sip port, did you change FXS to other then 5060 ?


#3

yes
there


#4

Not changed.
Both FXO and FXS have 5060 ! this make unstable work.

Change FXS to 5068 for example.


#5

ok i changed to 5068 FXS SIP port

could you help me to fix outbound route?

i m almost sure parameters are not correct

and have doubts about trunk too.


#6

forcing to use the trunk related to analogic line with a simple caller ID rule and so using a specific extension to test outgoing calls from this one i have this log in freepbx:

[2019-06-05 18:19:06] VERBOSE[1793][C-000025d9] netsock2.c: == Using SIP RTP TOS bits 184
[2019-06-05 18:19:06] VERBOSE[1793][C-000025d9] netsock2.c: == Using SIP RTP CoS mark 5
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [3345207319@from-internal:1] Macro(“SIP/07-000008bb”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/07-000008bb”, “TOUCH_MONITOR=1559751546.19539”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/07-000008bb”, “AMPUSER=07”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/07-000008bb”, “0?report”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/07-000008bb”, “1?Set(REALCALLERIDNUM=07)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/07-000008bb”, “AMPUSER=07”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/07-000008bb”, “0?limit”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/07-000008bb”, “AMPUSERCIDNAME=Elaborare07”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/07-000008bb”, “0?report”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/07-000008bb”, “AMPUSERCID=07”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/07-000008bb”, “__DIAL_OPTIONS=Ttr”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/07-000008bb”, “CALLERID(all)=“Elaborare07” <07>”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/07-000008bb”, “0?limit”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/07-000008bb”, “1?Set(GROUP(concurrency_limit)=07)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:14] GotoIf(“SIP/07-000008bb”, “1?continue”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Goto (macro-user-callerid,s,27)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:27] Set(“SIP/07-000008bb”, “CALLERID(number)=07”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:28] Set(“SIP/07-000008bb”, “CALLERID(name)=Elaborare07”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:29] Set(“SIP/07-000008bb”, “CDR(cnum)=07”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/07-000008bb”, “CDR(cnam)=Elaborare07”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/07-000008bb”, “CHANNEL(language)=en”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [3345207319@from-internal:2] Gosub(“SIP/07-000008bb”, “sub-record-check,s,1(out,3345207319,dontcare)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:1] GotoIf(“SIP/07-000008bb”, “0?initialized”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:2] Set(“SIP/07-000008bb”, “__REC_STATUS=INITIALIZED”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:3] Set(“SIP/07-000008bb”, “NOW=1559751546”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:4] Set(“SIP/07-000008bb”, “__DAY=05”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:5] Set(“SIP/07-000008bb”, “__MONTH=06”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:6] Set(“SIP/07-000008bb”, “__YEAR=2019”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:7] Set(“SIP/07-000008bb”, “__TIMESTR=20190605-181906”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:8] Set(“SIP/07-000008bb”, “__FROMEXTEN=07”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:9] Set(“SIP/07-000008bb”, “__MON_FMT=wav”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:10] NoOp(“SIP/07-000008bb”, “Recordings initialized”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:11] ExecIf(“SIP/07-000008bb”, “0?Set(ARG3=dontcare)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:12] Set(“SIP/07-000008bb”, “REC_POLICY_MODE_SAVE=”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:13] ExecIf(“SIP/07-000008bb”, “0?Set(REC_STATUS=NO)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:14] GotoIf(“SIP/07-000008bb”, “3?checkaction”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Goto (sub-record-check,s,17)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@sub-record-check:17] GotoIf(“SIP/07-000008bb”, “1?sub-record-check,out,1”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Goto (sub-record-check,out,1)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [out@sub-record-check:1] NoOp(“SIP/07-000008bb”, “Outbound Recording Check from 07 to 3345207319”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [out@sub-record-check:2] Set(“SIP/07-000008bb”, “RECMODE=dontcare”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [out@sub-record-check:3] ExecIf(“SIP/07-000008bb”, “1?Goto(routewins)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Goto (sub-record-check,out,7)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [out@sub-record-check:7] Gosub(“SIP/07-000008bb”, “recordcheck,1(dontcare,out,3345207319)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [recordcheck@sub-record-check:1] NoOp(“SIP/07-000008bb”, “Starting recording check against dontcare”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [recordcheck@sub-record-check:2] Goto(“SIP/07-000008bb”, “dontcare”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Goto (sub-record-check,recordcheck,3)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [recordcheck@sub-record-check:3] Return(“SIP/07-000008bb”, “”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [out@sub-record-check:8] Return(“SIP/07-000008bb”, “”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [3345207319@from-internal:3] Set(“SIP/07-000008bb”, “MOHCLASS=default”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [3345207319@from-internal:4] ExecIf(“SIP/07-000008bb”, “1?Set(TRUNKCIDOVERRIDE=0697841254)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [3345207319@from-internal:5] Set(“SIP/07-000008bb”, “_NODEST=”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [3345207319@from-internal:6] Macro(“SIP/07-000008bb”, “dialout-trunk,2,3345207319,off”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:1] Set(“SIP/07-000008bb”, “DIAL_TRUNK=2”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/07-000008bb”, “0?sub-pincheck,s,1()”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/07-000008bb”, “0?disabletrunk,1”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:4] Set(“SIP/07-000008bb”, “DIAL_NUMBER=3345207319”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:5] Set(“SIP/07-000008bb”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:6] Set(“SIP/07-000008bb”, “OUTBOUND_GROUP=OUT_2”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/07-000008bb”, “0?nomax”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:8] GotoIf(“SIP/07-000008bb”, “0?chanfull”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/07-000008bb”, “0?skipoutcid”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:10] Set(“SIP/07-000008bb”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:11] Macro(“SIP/07-000008bb”, “outbound-callerid,2”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/07-000008bb”, “0?Set(CALLERPRES()=)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/07-000008bb”, “0?Set(REALCALLERIDNUM=07)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/07-000008bb”, “1?normcid”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Goto (macro-outbound-callerid,s,6)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:6] Set(“SIP/07-000008bb”, “USEROUTCID=<0691516607>”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:7] Set(“SIP/07-000008bb”, “EMERGENCYCID=”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:8] Set(“SIP/07-000008bb”, “TRUNKOUTCID=0697841254”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/07-000008bb”, “1?trunkcid”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Goto (macro-outbound-callerid,s,14)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/07-000008bb”, “1?Set(CALLERID(all)=0697841254)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/07-000008bb”, “1?Set(CALLERID(all)=<0691516607>)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:16] ExecIf(“SIP/07-000008bb”, “1?Set(CALLERID(all)=0697841254)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:17] ExecIf(“SIP/07-000008bb”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:18] Set(“SIP/07-000008bb”, “CDR(outbound_cnum)=0697841254”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outbound-callerid:19] Set(“SIP/07-000008bb”, “CDR(outbound_cnam)=”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/07-000008bb”, “0?sub-flp-2,s,1()”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:13] Set(“SIP/07-000008bb”, “OUTNUM=3345207319”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:14] Set(“SIP/07-000008bb”, “custom=SIP/0697841254”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/07-000008bb”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/07-000008bb”, “0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:17] Macro(“SIP/07-000008bb”, “dialout-trunk-predial-hook,”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/07-000008bb”, “”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/07-000008bb”, “0?bypass,1”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:19] ExecIf(“SIP/07-000008bb”, “1?Set(CONNECTEDLINE(num,i)=3345207319)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/07-000008bb”, “1?Set(CONNECTEDLINE(name,i)=CID:0697841254)”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:21] GotoIf(“SIP/07-000008bb”, “0?customtrunk”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:22] Dial(“SIP/07-000008bb”, “SIP/0697841254/3345207319,300,Tt”) in new stack
[2019-06-05 18:19:06] WARNING[6726][C-000025d9] app_dial.c: Unable to create channel of type ‘SIP’ (cause 20 - Subscriber absent)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] app_dial.c: == Everyone is busy/congested at this time (1:0/0/1)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:23] NoOp(“SIP/07-000008bb”, “Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 20”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-dialout-trunk:24] GotoIf(“SIP/07-000008bb”, “0?continue,1:s-CHANUNAVAIL,1”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] Set(“SIP/07-000008bb”, “RC=20”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s-CHANUNAVAIL@macro-dialout-trunk:2] Goto(“SIP/07-000008bb”, “20,1”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Goto (macro-dialout-trunk,20,1)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [20@macro-dialout-trunk:1] Goto(“SIP/07-000008bb”, “continue,1”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Goto (macro-dialout-trunk,continue,1)
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [continue@macro-dialout-trunk:1] NoOp(“SIP/07-000008bb”, “TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 20 - failing through to other trunks”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [continue@macro-dialout-trunk:2] Set(“SIP/07-000008bb”, “CALLERID(number)=07”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [3345207319@from-internal:7] Macro(“SIP/07-000008bb”, “outisbusy,”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outisbusy:1] Progress(“SIP/07-000008bb”, “”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outisbusy:2] Playback(“SIP/07-000008bb”, “all-circuits-busy-now,noanswer”) in new stack
[2019-06-05 18:19:06] VERBOSE[6726][C-000025d9] file.c: – <SIP/07-000008bb> Playing ‘all-circuits-busy-now.ulaw’ (language ‘en’)
[2019-06-05 18:19:08] VERBOSE[6726][C-000025d9] pbx.c: – Executing [s@macro-outisbusy:3] Playback(“SIP/07-000008bb”, “pls-try-call-later,noanswer”) in new stack