How to use 2 T1/E1/J1 with HA100

ip-communications

#1

Hi ,
I configured 2 UCM6510 and HA100 . But I have 2 T1/E1/J1 line . Can you tell me how can i live 2 T1/E1/J1 at a time ?


#2

Oh boy. I mean, you can’t with just that equipment. In fact, I really think you’ve got the wrong stuff.

Best I can think of is to add a PRI to SIP gateway for the second PRI. Plug the first PRI into the 6510, it will have full fail over.

Plug the second PRI into the gateway. Everything will be fine unless the gateway fails. You could keep a second gateway on-hand, identically programmed down to the IP address. Keep it as a cold spare. Obviously unplugged until needed or you’ll have an IP conflict.

If you simply must have full failover, you need a second set of 6510’s and an HA100 for the second PRI.