While in decoder mode the image outputted to the RCA cable stays on the last image transmitted if connection to the encoder is lost. Is there a way to make it go to a blank screen instead?
Just for my 2c worth… We use these units and rely on the last frame hold.
I wouldn’t want that to change. Perhaps selectable “Hold Last Frame”?
Thanks for your input. By design, the GXV3500 will hold the last frame if there is a disconnection issue. Per mjwillia, we will work with our surveillance team to see if we can add a “Hold Last Frame” option.
I do not have video output from the BNC connector. VLC playback is fine - I’m decoding the RTSP stream RTSP URL set to rtsp://192.168.1.169