GXP21xx Offline


To add the GXP21xx phones to GDMS does anything need to be done on the phone itself, or is it simply just adding the MAC and SN to GDMS?

Is it possible to add the UCMs to GDMS (UCM6208 specifically)?


All you need to do on the handset is check the settings at webgui->maintenance-TR-069 although as far as I remember they should be populated anyway.
UCM isn’t supported by GDMS…yet


Supported Device Models Minimum Recommended
GXP2130 (TBD) (TBD)
GXP2135 (TBD) (TBD)
GXP2140 (TBD) (TBD)
GXP2160 (TBD) (TBD)
GXP2170 (TBD) (TBD)
GXV3350 (TBD) (TBD)
GXV3370 (TBD)
GXV3380 (TBD) (TBD)
HT801 (TBD) (TBD)


Make sure you get the right firmware


What are the typical settings in there? Seems like everything is blank right now.


Phones are running

#7 is not a GXP21xx firmware.

#8 was released for GXP21xx as beta earlier this week and introduces GDMS support amongst others


If you’re using then they should work with GDMS. I’ce tested that fw with a 2135 in our workshop and we can push changes, reboot, reset etc. Seems to work at first glance but it is after all beta software




Sorry, got confused since the DP has a firmware with the exact same version.


Agreed. If the beta firmware is loaded onto the GXP, GDMS should work fine.


Dear users,

Thank you all so much for testing on GDMS platform! Your suggestions are very important to us!

We have not announced GXP21xx compatible firmware version with GDMS platform yet, and we will announce the compatible firmware of GXP21xx when we release next GDMS version. For Beta testers, you can use for testing purpose temporarily. You can download it from our official website. Our support team are testing this version with GDMS platform, and if there is no block issue for this version, we may regard this firmware version as the candidate for GDMS platform. Thanks a lot for all your testing!

Thank you!


Sounds good, as far as getting the device to show “Online” in GDMS, is there any configuration needed on the phone like TR-061? What settings would we use if so?


Dear Dshrout,

Thank you for you feedback! Users only needs to use device’s MAC and S/N to associate the device with GDMS platform. On TR-069 page, users only need to fill in ACS URL to https://acs.gdms.cloud and this configuration in the device is filled by default. Let me know if you have any further questions.

Thank you!