Grandstream Enterprise Multi-WAN Gigabit VPN Router (GS-GWN7000)


#1

Hello

I have a Grandstream Enterprise Multi-WAN Gigabit VPN Router (GS-GWN7000) and acces point

7615 WGN and with pool 192.168.1.x/24 but acces point can’t get ip address from Grandstream Enterprise Multi-WAN Gigabit VPN Router (GS-GWN7000) !!!

so please how allow AP 7615 get ip addrees and discovred from Grandstream Enterprise Multi-WAN Gigabit VPN Router (GS-GWN7000) !!

what are the steps !!

i wait a reply and help from wirless grandstream

thanks in advance


#2

please i wait a reply from expert wirless Grandstream …

i have Grandstream Enterprise Multi-WAN Gigabit VPN Router (GS-GWN7000) with ios 1.0.2.71 and AP 7615 WGN and i want this AP dicovred !!

so how allow AP get ip address and discovred

thanks in adv


#3

1st, is the AP and the 7000 connected to the same physical network? Is the AP set for DHCP and is the 7000 set to be a DHCP server and did you set a pool of available IPs to issue.

You had another post about the password where you indicated you changed it. If this did indeed occur, it had an IP so you could access and change. Where did it get this IP?


#4

1++ toplogie : Router GWN700 connteced to switch 2960 cisco and AP 7615 connted to switch 2960 cisco

routre GWN7000 with ios 1.0.2.71 so i can’t disovred AP and router GWN as a dhcp server with default pool 192.168.1.x/24

so how ap 7615 disovred in GWN7000 !!

this is me ^problem and that allow wifi
i wait your reply and help

thanks in advance


#5

I suggest you refer to the firmware page for both devices and read the release notes and update same per the instructions. Then try.


#6

GWn cannot control GWN 7615.
IP was ok.


#7

Thanks Marcin to help me

yes you are right …ok

the problem is reolved


#8