Firmware for GDS3710 released as Beta



Dear Grandstream Customers,

Firmware for GDS3710 is now released as Beta. Here is the link to the release notes:

The firmware and release notes can be downloaded from:


  1. Local firmware upgrade is recommended. Please download and use the utility provided by Grandstream for local firmware upgrade, avoiding Internet or power interruption that may brick the device during firmware upgrading process.
  1. Once upgraded to, downgrading to version lower than is NOT supported.

  2. Two different firmware packages are available depending on the current firmware version of your GDS3710.

Please make sure to download the correct package for upgrading, and do not mix the two firmware packages.

Please contact us should you have any issues. Thank you for your support for Grandstream products.

Technical Support
Grandstream Networks, Inc.



I love this joke in release notes:
“Please refer to GDS3710 User Manual for details about how to configure and control the
Door1 and Door2 operation respectively”
“Added Alarm_Out port (COM1 interface) be used as Open Door 2.[…] This is a major enhancement, please refer
User Manual for more details and how to use.”

Manual is for 4.9 :> so there is no data for this :slight_smile:


The user manual is not updated yet, please keep tuned.

At the same time, I will post some using logic here later on. Most of the new features are briefly introduced in the release note, please check out the release note for the new feature part.

Thank you for using GDS3710.




Please refer to this file to understand two door open/control logic. Hope this helps. Feel free to suggest your comments. Thanks for using GDS3710.


Thanks :slight_smile:
Can you add this to Beta Firmware page ? Not everyone will check this post and that part is crucial :slight_smile: