Firmware for GWN7801(P)/GWN7802(P)/GWN7803(P) released as official



Dear Grandstream Customers,

Firmware for GWN7801/7801P/7802/7802P/7803/7803P is now released as official. Here is the link for the release notes:

The firmware and release notes can be downloaded from:

Please contact us should you have any issues. Thank you for your support for Grandstream products.

Technical Support
Grandstream Networks, Inc.



I updated to this firmware today. Now I am having a problem with the network.

The switch seems to be disconnected from every 10 to 15 min after 3 or 4 min it comes back.

And when the switch is not seen in, I have no internet connection.

I already reseted the switch, but it doesn’t help.
There is nothing configured on the switch, no vlans etc.


we can leave the switch in DHCP Mode, then if DHCP is working at the network we can manage the Switch via GWN Cloud->OK
If we give a static IP to the Switch, then we can also set a DNS Server in VLAN1.
But where to configure the Gateway then? We cannot find any point in the whole gui.

Using the CLI via SSH we can see “Manual Gateway” is set to
So the Switch cannot connect to GWN Cloud if we use a static IP for the switch
How to set the IP of the Manual Gateway ond GUI or CLI to make it work?


Best regards