DP752 and Zero Config


Not having updated the model of DP752 on Zero Config UCM6204, I have problems with provisioning, it does not self-configure in any way. By forcing provisioning, restart DP752 again.
I specify that everything is done on the local network and that I have also updated the FW
In addition, the DP730 had to do it 3 times to update, the first 2 failed without reason.
I would say that more than beta we are at an alpha.
(I also made 2 factory reset twice, without positive results, I had to configure it entirely by hand).


I regret to inform you that the device is released as is the firmware. Also, version is the latest one.

Try upgrading first then see if ZeroConfig works. Also, don’t forget to update the model config on the UCM.


update the FW
then set Verify host when using HTTPS=no