Communication between base


#1

hello, is it possible to communicate handsets from two different dp750 bases? if so how to proceed. I am new in the field


#2

you can try with IP call,
you find everything in the manual,
but a VoIP server would be advisable, for example UCM.

https://documentation.grandstream.com/article-categories/dect-base-stations/


#3

I have a ucm6202 server. is it possible to go through this server and how does the configuration


#4

if you have 10 accounts on your UCM, for example, 1001 ~ 1010, on 1 DP750, you can register 1001~1005 assign them to 5 handsets’ Line 1, set the account mode to “HS1”, “HS2”, “HS3”, “HS4”, “HS5”, etc.
On the other DP750, you can register account 1006~1010, and also assign them to each handsets.
Then you can use each handset to dial 10xx account to call each other.


#5

What Shawn is trying to say is:

UCM Extensions 1001 to 1010
Assign extensions 1001, 1002, 1003, 1004, 1005 to base 1, assign 1006, 1007, 1008, 1009, 1010 to base 2

Then you assign the handsets accordingly so they can simply dial each extension number.


#6

I understand. the problem is that I first used a dinstar uc120 server with which we can create 60 Sip accounts. but unfortunately there are only 5 accounts that work.


#7

for this topic you must contact the vendor’s assistance