Can receive calls, but cannot dial out


#1

I am trying to use an HT813 and HT801 to extend a POTS line over our network. I used the “Peering HT8XX with HT813” document as a guide. I can receive calls fine, but I cannot make calls. I setup a syslog server and this is what I see:

192.168.1.241 Feb 12 13:08:47 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]ATACtrl::processPhoneOffHook on port 0:0, status = CALL_IDLE/CALL_IDLE, reg’d:0, allow calls w/o reg:1
192.168.1.241 Feb 12 13:08:50 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]Call(10)::Call, Creating Call object 10 at port 0:0, caller 1, mswUF 0
192.168.1.241 Feb 12 13:09:01 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]Call(10)::run, Dialing xxxxxxxxxx, disableCW =0
192.168.1.241 Feb 12 13:09:01 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]RTP::openSocket Layer 3 DSCP for RTP set to 46
192.168.1.241 Feb 12 13:09:01 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::cb_snd_message: Transaction 20 , state=0
192.168.1.241 Feb 12 13:09:01 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::run Active transactions: 1
192.168.1.241 Feb 12 13:09:01 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPClientTransaction::sendRequest: Request 20 is sent
192.168.1.241 Feb 12 13:09:01 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::cb_rcv1xx: Received 100 response for transaction 20 (INVITE)
192.168.1.241 Feb 12 13:09:01 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPTransaction::waitForResponse: Request 20 got status code 100
192.168.1.241 Feb 12 13:09:01 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::run Active transactions: 1
192.168.1.240 Feb 12 13:09:01 HT813 [00:0b:82:ef:fa:b8] [1.0.3.12]Nuvoton::fxoHookSet, Set Hook to OffHook on port 1:0
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::cb_rcv1xx: Received 180 response for transaction 20 (INVITE)
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPTransaction::waitForResponse: Request 20 got status code 180
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::run Active call dialogs: 1
192.168.1.240 Feb 12 13:09:08 HT813 [00:0b:82:ef:fa:b8] [1.0.3.12]RTP::openSocket Layer 3 DSCP for RTP set to 46
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::cb_rcv2xx: Received 200 response for transaction 20(INVITE)
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPTransaction::waitForResponse: Request 20 got status code 200
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::run Active call dialogs: 1
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]RTP::setSDP on port 0:0, current sdp: 0, new sdp: 0x15c898
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]RTP SSRC/SEQ inited on port 0 ch 0
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]Call(10)::processMedia, Call started on port 0:0:5004,status=CALL_COMMUNICATION,canSend=1,canRecv=1,disable2833=0,dtmf:RFC_2833,disableLEC:0
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]GSDSP::stop RTP on port 0:0
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]GSDSP::RTP stopped on port 0:0
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]RTP::start, RTP start on port 0:0, remote target [192.168.1.240]:5012, local rtp port:5004
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]RTP::start on port 0:0, SRTP status NO_SRTP
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]GSDSP::startRTP at port 0:0, RTP encoder 0@20, VAD 0, disableLEC:0 ptevt:101
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]GSDSP::startRTP, JB min =120, JB max =1000, silence =0
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]GSDSP::startRTP, Start RTP on port 0:0, socket 20, sndrcv 3, remote [192.168.1.240]:5012
192.168.1.241 Feb 12 13:09:08 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]GSDSP::startRTP started on port 0:0
192.168.1.240 Feb 12 13:09:10 HT813 [00:0b:82:ef:fa:b8] [1.0.3.12]Nuvoton::run(), FXO_BAT_DROPPED event received on port 1 ch 0
192.168.1.241 Feb 12 13:09:10 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::cb_rcvreq: Received SIP request BYE
192.168.1.241 Feb 12 13:09:10 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SigCtrl::processCallCompleted on port 0:0, status = CALL_ENDING/CALL_IDLE
192.168.1.240 Feb 12 13:09:10 HT813 [00:0b:82:ef:fa:b8] [1.0.3.12]Nuvoton::fxoHookSet, Set Hook to OnHook on port 1:0
192.168.1.241 Feb 12 13:09:10 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]ATACtrl::processCallCompleted on port 0:0, status = CALL_IDLE/CALL_IDLE canConf:1
192.168.1.241 Feb 12 13:09:10 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]GSDSP::stop RTP on port 0:0
192.168.1.241 Feb 12 13:09:10 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::run Active call dialogs: 1
192.168.1.241 Feb 12 13:09:10 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]GSDSP::RTP stopped on port 0:0
192.168.1.241 Feb 12 13:09:10 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]RTP stop on port 0:0 local rtp port:5004 sdp:0x15c898
192.168.1.241 Feb 12 13:09:10 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]Call(10)::processMedia, Call stopped on port 0:0, inTransfer = 0
192.168.1.241 Feb 12 13:09:10 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]ATACtrl Loop current disconnect on port 0
192.168.1.241 Feb 12 13:09:10 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::run Active call dialogs: 1
192.168.1.241 Feb 12 13:09:10 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]Deleting Call object 10 port 0:0, callCount=0
192.168.1.240 Feb 12 13:09:11 HT813 [00:0b:82:ef:fa:b8] [1.0.3.12]Nuvoton::run(), FXO_POLARITY (1) event received on port 1 ch 0
192.168.1.240 Feb 12 13:09:11 HT813 [00:0b:82:ef:fa:b8] [1.0.3.12]Nuvoton::run(), IFX_TAPI_EVENT_FXO_NOPOH event received on port 1 ch 0
192.168.1.241 Feb 12 13:09:13 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]ATACtrl::processPhoneOnHook on port 0:0, status = CALL_IDLE/CALL_IDLE
192.168.1.241 Feb 12 13:09:26 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPStack(0)::run Deleting call dialog (10)
192.168.1.241 Feb 12 13:09:26 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPDialog::~SIPDialog: Cleaning in-dialog in-transaction
192.168.1.241 Feb 12 13:09:26 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPDialog(10)::~SIPDialog: Cleaning in-dialog out-transaction
192.168.1.241 Feb 12 13:09:26 HT801 [00:0b:82:d7:27:0b] [1.0.15.4]SIPDialog(10)::~SIPDialog, Deleting SDP in the dialog
Any help would be appreciated!

#2

Changing the “Current Disconnect Threshold” to 600 milliseconds solved my problem. :slightly_smiling_face:


#3