Author Topic: Problem with GXW410X  (Read 34 times)

hercross

  • Newbie
  • *
  • Posts: 2
    • View Profile
Problem with GXW410X
« on: December 04, 2017, 05:29:37 AM »
Hi I have a GXW4104, with one FXO line connected..

I have a problem with transfer..

When I receive a call, by this FXO, and I want to transfered to another extensions, no problem.

But when I want to transfered to a outside number, using IP line, I have a problem..

A call FXO line, a hold the call, dial a mobil, the mobil ring, I can answer and talk with the extension, but when the extension wants transfer to me, extensions hangup, I hear moh in the mobil and A hear nothing..

I check IP line in another PBX and it works fine..

I update asterisk, I test with the same version I have in my office, and in my office works fine..

The GXW is update to the last firmware 1.4.1.5..

I think the problem is in GXW, but I down't know where..

Anyone has the same problem?

Thanks

Marcin

  • Hero Member
  • *****
  • Posts: 3183
    • View Profile
    • Email
Re: Problem with GXW410X
« Reply #1 on: December 05, 2017, 12:28:54 AM »
You will not transfer via this PSTN line, ITSP will not allow it.
For such transfer PBX need to have 2 line and after transfer both lines will be busy.
Life is waste of time

hercross

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Problem with GXW410X
« Reply #2 on: December 05, 2017, 05:47:57 AM »
Yes, I know.. I transfer the call using IP line.. So I use FXO line to received calls and IP line to transfer it..

Marcin

  • Hero Member
  • *****
  • Posts: 3183
    • View Profile
    • Email
Re: Problem with GXW410X
« Reply #3 on: December 06, 2017, 11:55:57 PM »
Then this is PBX problem.
GXW have nothing with this.
Life is waste of time