Author Topic: Firmware 1.0.4.20 for GWN7000 released as Beta  (Read 62 times)

grandstream

  • Administrator
  • Sr. Member
  • *****
  • Posts: 486
    • View Profile
    • Email
Firmware 1.0.4.20 for GWN7000 released as Beta
« on: August 11, 2017, 09:45:36 PM »
Dear Grandstream Customers,

     Firmware 1.0.4.20 for GWN7000 is now released as Beta. The firmware and release note can be downloaded from:
http://www.grandstream.com/support/firmware

     Please contact us should you have any issues. Thank you for your support for Grandstream products.

Technical Support
Grandstream Networks, Inc.

thadrumr

  • Beta Club Members
  • Jr. Member
  • *
  • Posts: 82
    • View Profile
Re: Firmware 1.0.4.20 for GWN7000 released as Beta
« Reply #1 on: August 12, 2017, 06:22:50 AM »
I can't believe that the something as major as the firewall input rules not working right was still not fixed in this version.  You still cannot specify an interface on the firewall input rules as it doesn't work as I have stated in this Forum.  The IPV6 DHCP still doesn't work either while using a IPV6 Tunnel.  Also when you enable DPI you have to manually reboot the router as it doesn't restart on its own even though it says it will.
« Last Edit: August 12, 2017, 06:31:56 AM by thadrumr »