IP PBXs   UCM6100 series IP PBX Appliance


Firmware 1.0.18.16 for UCM6102/6104/6108/6116 released as official (6)

Dear Grandstream Customers, Firmware 1.0.18.16 for UCM6102/6104/6108/6116 is now released as official. Here is the link to the release notes: http://firmware.grandstream.com/Release_Note_UCM61xx_1.0.18.16.pdf The firm…

About the UCM6100 series IP PBX Appliance category (1)
Problemas con switch (3)
UCM 6102 & Huawei b525 router (5)
Video Intercom, Call Hangup after Pickup (3)
Error (2)
UCM with VPN extension not able to make outbound call, inbound works fine ( 2 ) (25)
Issue to external number (14)
UCM Change the clock by it self (2)
UCM 6102 With Yealink T42S (16)
Generate QR code as internal extension without sending email (5)
Why must I dial 1 (2)
UCM6102 - 25 THOUSAND attempted calls within the last 24 hours (15)
Forwarding Calls (3)
UCM6100 communication with HT701 and non grandstream phone ( 2 ) (33)
Looking for install help UMC 6108 (6)
Problema al transferir llamadas (5)
UCM610 firmware upgrade issue from version 1.0.15.16 (1)
UnMonitored SIP Trunk Status for PBX UCM6104 (4)
Locking extension to call certain extensions numbers or only one number (4)
Force extension to always use a specific outbound trunk (10)
One way paging (2)
Call is cut off by leaving it on hold (4)
What's in the Data Partition (4)
UCM6102 reboot loop (2)
Skype for business integrate (12)
After latest upgrade UCM6102 v1.0.18.16 one way audio (14)
Pin occupancy (wireing) at the FXO's (2)
Instant call park? (10)
Defining Outbound Route (4)