Author Topic: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta  (Read 732 times)

GSSupport65

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 873
    • View Profile
Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« on: February 17, 2017, 09:44:55 AM »
Dear Grandstream Customers,

    Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 is now released as Beta. The firmware and release note can be downloaded from:
http://www.grandstream.com/support/firmware

    Please note 1.0.13.14 has fixed the Email issue reported in the forum post here:
http://forums.grandstream.com/forums/index.php?topic=34332.0

    Please contact us should you have any issues. Thank you for your support for Grandstream products.

Technical Support
Grandstream Networks, Inc.
« Last Edit: March 01, 2017, 08:57:39 PM by grandstream »

rosdamiano

  • Jr. Member
  • **
  • Posts: 60
  • impianti.tel
    • View Profile
    • Email
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #1 on: February 17, 2017, 10:29:16 AM »
Changelog?
tnx
Damiano
« Last Edit: February 18, 2017, 08:51:28 AM by rosdamiano »

CyFo

  • Beta Club Members
  • Hero Member
  • *
  • Posts: 1318
  • CyFo Solutions
    • View Profile
    • CyFo Solutions
    • Email
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #2 on: February 20, 2017, 01:08:50 PM »
This release and the previous one (actually also 12.19) sends emails without the time zone, so the server uses its own time zone. Which is wrong for most people using a hosted email server.
Weirdly the test emails do include the time zone therefore they display the correct time.
The time I am talking about is the time of the email (in tis header), since the time in the body is fine.
Certified Grandstream Reseller
www.cyfosol.com
Boston, MA

CyFo

  • Beta Club Members
  • Hero Member
  • *
  • Posts: 1318
  • CyFo Solutions
    • View Profile
    • CyFo Solutions
    • Email
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #3 on: February 20, 2017, 03:27:15 PM »
Same as 13.13
“Referred-By” header is missing in the INVITEs so the phone doesn’t show that the incoming call is a transferred call.

Please add it back, it was included in FW 1.0.10.44 and 1.0.11.27 and it showed nicely in the phones.
Certified Grandstream Reseller
www.cyfosol.com
Boston, MA

CyFo

  • Beta Club Members
  • Hero Member
  • *
  • Posts: 1318
  • CyFo Solutions
    • View Profile
    • CyFo Solutions
    • Email
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #4 on: February 20, 2017, 03:34:57 PM »
The CDR API doesn’t start if the permitted IP mask is “0.0.0.0” needed for public IPs requests. This was working with 11.27 but broke with 12.19+.
Certified Grandstream Reseller
www.cyfosol.com
Boston, MA

SFX Group

  • Sr. Member
  • ****
  • Posts: 437
  • whats this box for?
    • View Profile
    • ///ASHLEY GRIFFIN
    • Email
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #5 on: February 20, 2017, 09:14:22 PM »
Whats the difference between v1.0.13.13 and v1.0.13.14?
Many Thanks
Ashley
© Copyright 2016 - www.ashleygriffin.ca

Network Specialist (over 25 years)
GrandStream Certified Reseller

Marcin

  • Hero Member
  • *****
  • Posts: 2427
    • View Profile
    • Email
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #6 on: February 20, 2017, 11:16:47 PM »
* Updated dropbear to v2016.74

And probably few unknown :)
Life is waste of time

GSSupport65

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 873
    • View Profile
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #7 on: February 21, 2017, 01:17:40 AM »
Whats the difference between v1.0.13.13 and v1.0.13.14?

Hi SFX Group,

    1.0.13.14 mainly fixed the Email issue reported in 1.0.13.13 release.
http://forums.grandstream.com/forums/index.php?topic=34332.0

Thanks!

GSSupport65

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 873
    • View Profile
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #8 on: February 21, 2017, 01:19:17 AM »

GSSupport65

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 873
    • View Profile
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #9 on: February 21, 2017, 01:19:51 AM »
Same as 13.13
“Referred-By” header is missing in the INVITEs so the phone doesn’t show that the incoming call is a transferred call.

Please add it back, it was included in FW 1.0.10.44 and 1.0.11.27 and it showed nicely in the phones.

Hi CyFo,

    This has been reported and will be fixed in future release.

Thanks!

GSSupport65

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 873
    • View Profile
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #10 on: February 21, 2017, 09:31:54 AM »
This release and the previous one (actually also 12.19) sends emails without the time zone, so the server uses its own time zone. Which is wrong for most people using a hosted email server.
Weirdly the test emails do include the time zone therefore they display the correct time.
The time I am talking about is the time of the email (in tis header), since the time in the body is fine.

Hi CYFO,

Could you please kindly provide a screenshot indicating the time zone information you mentioned? Thanks a lot.

Best regards,
GSSupport65

GSSupport65

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 873
    • View Profile
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #11 on: February 21, 2017, 09:59:47 AM »
The CDR API doesn’t start if the permitted IP mask is “0.0.0.0” needed for public IPs requests. This was working with 11.27 but broke with 12.19+.

Hi CYFO,

    This is reported and improvement will be considered in future release.

Thanks!

rosdamiano

  • Jr. Member
  • **
  • Posts: 60
  • impianti.tel
    • View Profile
    • Email
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #12 on: February 21, 2017, 02:01:34 PM »
Changelog?
tnx
Damiano

Hi ROSDAMIANO,

    Please kindly find release note here:

UCM61xx/62xx release note:
http://firmware.grandstream.com/BETA/Release_Note_UCM61xx62xx_1.0.13.14.pdf

UCM6510 release note:
http://firmware.grandstream.com/BETA/Release_Note_UCM6510_1.0.13.14.pdf

Thanks!

I was referring to the changelog 1.0.13.13 -> 1.0.13.14
tnx
Damiano

CyFo

  • Beta Club Members
  • Hero Member
  • *
  • Posts: 1318
  • CyFo Solutions
    • View Profile
    • CyFo Solutions
    • Email
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #13 on: February 22, 2017, 07:06:51 AM »
Hi CYFO,

Could you please kindly provide a screenshot indicating the time zone information you mentioned? Thanks a lot.

Best regards,
GSSupport65
I already open a ticket for that. That way is easier, since there is no workaround for the issue. Thanks!
Certified Grandstream Reseller
www.cyfosol.com
Boston, MA

GSSupport65

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 873
    • View Profile
Re: Firmware 1.0.13.14 for UCM61xx/UCM62xx/UCM6510 released as Beta
« Reply #14 on: February 22, 2017, 01:37:39 PM »
Hi CYFO,

Could you please kindly provide a screenshot indicating the time zone information you mentioned? Thanks a lot.

Best regards,
GSSupport65
I already open a ticket for that. That way is easier, since there is no workaround for the issue. Thanks!

Hi CYFO,

    Could you please kindly share the ticket number so I can check more details?

Thanks!